unquadquad with jade box switches
I made a small 4x4 plate to use plate mount switches with the
unquadquad. My
first unquadquad used PCB mount switches without a plate.
The plates have holes to access the screws that mount the PCB to the base. The holes are large enough for most screw heads to fit through.
There are 9 of the 4x4 plates to cover the entire 12x12 board.
The individual 4x4 plate has notches for switch top removal (for Cherry and Gateron switches.) The box switches are not compatible with the notches.
Gerber files on
git.
