Pages

Monday, October 30, 2017

Gherkin ML

Gherkin with Cherry ML switches

Same PCB dimensions as the regular MX Gherkin PCB. Cherry ML switches are PCB mount only, the Gherkin top and bottom switch plates are not compatible with this PCB. The ML switches are centered and have the same 19.05mm spacing as the MX switches.

The matrix is the same as the original Gherkin, it can use the same firmware, there are no LEDs.

The keycaps and switches were recycled from a PLUM ortholinear keyboard. PLUM keyboards can still be found on eBay.

Gerber files are on git.

ML switches are very small. Most ML keyboards use 18mm spacing. The Gherkin ML is using the same 19.05mm spacing MX switches use..

Bottom of the PCB with socketed Pro Micro clone.

PLUM keycaps. They are ABS with laser legends. 18mm spacing would not work well with these keycaps, they would rub against each other.

Side view with 6mm M2 spacers. A second PCB is used as the bottom. It would be possible to use shorter standoffs if you use a very low profile socket for the Pro Micro.

USB connector end.

Thickness compared to a MX Gherkin built with the same size spacers.